AcidaFoam - Solid Stick Scale Remover
Product Data Sheet
 
OUTSTANDING CHARACTERISTICS:
2 sizes 11/4 x 15" & 5/8 x 15"
Aids removal of acid soluble scale,
iron sulfide and rust from water
injection/disposal wells.
 
APPLICATION METHOD:
The most common method for applying AcidaFoam ™ sticks is through a conventional lubricator system. In a water injection or disposal well, the lubricator is normally installed on top of the tubing so that the sticks can be dropped down the well routinely without shutting the injection system down. AcidaFoam ™ sticks will dissolve in approximately 30 to 90 minutes depending on water temperature, motion and salt content. The sticks will dissolve in water less than 120°F, but at a slower rate. Oil and gas producing wells on pumping units can be treated using a lubricator system attached to the casing and equipped with a by-pass bleeder arrangement to dissolve the stick and flush the solution downhole.
TYPICAL PHYSICAL PROPERTIES:
Form: Solid stick, brown color
Weight: 11/4" 0.75lbs.
5/8" 0.23lbs.
Solubility: Fresh water, brine soluble, oil insoluble.
Melt Pt.: 120°F
HANDLING PRECAUTIONS:
AcidaFoam ™ Solid Stick Foamers are sealed in individual cardboard tubes. Use care and personal protection to avoid contact with eyes and skin. Refer to Material Safety Data for complete safety precautions.
   

PRODUCT DESCRIPTION:
Pro-Finer AcidaFoam is a combination of acid, surfactants and inhibitor formulated into a solid stick form. The primary use is to remove acid soluble scale deposits such as calcium carbonate, rust and iron sulfide from water injection/disposal wells, thus lowering injection pressures downhole. AcidaFoam sticks are available in two sizes: 11/4"x15" and small diameter 5/8"x15". They are effective and much less corrosive to downhole equipment compared to liquid acids, because most of the acid is not released from the stick until it reaches bottom. AcidaFoam Solid Stick Scale Remover is not recommended for potable water systems.

PRODUCT PACKAGING:
AcidaFoam ™ Solid Stick Foamer is available through most oilfield supply stores as 44 count tool boxes, 70 count ice chests and in bulk quantities 75 count per box..
 
Pro-Finer Chemical Corporation
P.O. Box 701891
Tulsa, Oklahoma

74170-1891

1-888-249-3626 - Toll Free
(918) 227-4862
- Phone
(918) 227-4865
- Fax
     
As mistakes do happen, Pro-Finer Chemical corp. is not responsible for typographical errors that may occur withing this site.
All material, including but not limited to text, graphics and logos are © Pro-Finer Chemical corp. This site is up to date as of Feb. 2006.
Some graphics on this site require a Macromedia Flash Player. Documents that are available for download from this site are stored in
.pdf format and require the latest version of Adobe Acrobat Reader to be viewd properly.